Edge-Core ECS4660-28F Management Manual page 949

E
XAMPLE
Console(config)#ntp authentication-key 45 md5 thisiskey45
Console(config)#
R C
ELATED OMMANDS
ntp authenticate (947)
This command enables NTP client requests for time synchronization from
ntp client
NTP time servers specified with the ntp servers command. Use the no
form to disable NTP client requests.
S
YNTAX
[no] ntp client
D S
EFAULT ETTING
Disabled
C M
OMMAND
Global Configuration
C U
OMMAND
The SNTP and NTP clients cannot be enabled at the same time. First
◆
disable the SNTP client before using this command.
The time acquired from time servers is used to record accurate dates
◆
and times for log events. Without NTP, the switch only records the time
starting from the factory default set at the last bootup (i.e., 00:00:00,
Jan. 1, 2001).
This command enables client time requests to time servers specified via
◆
the ntp servers command. It issues time synchronization requests
based on the interval set via the ntp poll command.
E
XAMPLE
Console(config)#ntp client
Console(config)#
R C
ELATED OMMANDS
sntp client (945)
ntp server (950)
C
HAPTER
ODE
SAGE
– 949 –
| System Management Commands
24
NTP Commands