Edge-Core ECS4660-28F Management Manual page 947

show sntp
NTP Commands
ntp authenticate
E
XAMPLE
Console(config)#sntp server 10.1.0.19
Console#
R C
ELATED OMMANDS
sntp client (945)
sntp poll (946)
show sntp (947)
This command displays the current time and configuration settings for the
SNTP client, and indicates whether or not the local time has been properly
updated.
C M
OMMAND ODE
Normal Exec, Privileged Exec
C U
OMMAND SAGE
This command displays the current time, the poll interval used for sending
time synchronization requests, and the current SNTP mode (i.e., unicast).
E
XAMPLE
Console#show sntp
Current Time : Nov 5 18:51:22 2006
Poll Interval : 16 seconds
Current Mode : Unicast
SNTP Status : Enabled
SNTP Server : 137.92.140.80 0.0.0.0 0.0.0.0
Current Server : 137.92.140.80
Console#
This command enables authentication for NTP client-server
communications. Use the no form to disable authentication.
S
YNTAX
[no] ntp authenticate
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
You can enable NTP authentication to ensure that reliable updates are
received from only authorized NTP servers. The authentication keys and
– 947 –
| System Management Commands
C 24
HAPTER
NTP Commands