Edge-Core ECS4660-28F Management Manual page 929

Hide thumbs Also See for ECS4660-28F:

Table of Contents

This command sets the password intrusion threshold which limits the

password-thresh

number of failed logon attempts. Use the no form to remove the threshold

The default value is three attempts.

Line Configuration

When the logon attempt threshold is reached, the system interface

becomes silent for a specified amount of time before allowing the next

logon attempt. (Use the

this threshold is reached for Telnet, the Telnet logon interface shuts down.

To set the password threshold to five attempts, enter this command:

Console(config-line)#password-thresh 5

Console(config-line)#

silent-time (929)

This command sets the amount of time the management console is

inaccessible after the number of unsuccessful logon attempts exceeds the

threshold set by the

remove the silent time value.

The default value is no silent-time.

password-thresh [threshold]

no password-thresh

threshold - The number of allowed password attempts.

(Range: 1-120; 0: no threshold)

password-thresh

silent-time [seconds]

no silent-time

seconds - The number of seconds to disable console response.

(Range: 0-65535; where 0 means disabled)

| System Management Commands

command to set this interval.) When

command. Use the no form to

Chapters

Table of Contents