Use these commands to back up and restore configuration and firmware via TFTP.
90.1 Command Summary
The following section lists the commands for this feature.
Table 208 tftp Command Summary
COMMAND
copy tftp flash <ip> <remote-
file>
copy tftp config <index> <ip>
<remote-file>
copy tftp config merge <index>
<ip> <remote-file>
copy running-config tftp <ip>
<remote-file>
TFTP Commands
DESCRIPTION
Restores firmware via TFTP.
Restores configuration with the specified filename from the
specified TFTP server to the specified configuration file on
the Switch.
index: 1 or 2
Use reload config <1|2> to restart the Switch and use
the restored configuration.
Note: This overwrites the configuration on the Switch
with the file from the TFTP server.
Merges configuration with the specified filename from the
specified TFTP server with the specified configuration file on
the Switch.
index: 1 or 2
Use reload config <1|2> to restart the Switch and use
the restored configuration.
Note: This joins the configuration on the Switch with
the one on the TFTP server, keeping the
original configuration file and simply adding
those parts that are different.
Backs up running configuration to the specified TFTP server
with the specified file name.
Ethernet Switch CLI Reference Guide
326
C
H A P T E R
90
M
P
E
13
E
13
E
13
E
13