ZyXEL Communications XS3800-28 Cli Reference Manual page 297

Hide thumbs Also See for XS3800-28:
Table of Contents

Advertisement

Table 188 snmp-server Command Summary (continued)
COMMAND
snmp-server trap-community
[cipher] <property>
snmp-server trap-destination
<ip> [udp-port <socket-number>]
[version <v1|v2c|v3>] [username
<name>]
snmp-server trap-destination
<ip> enable traps
<aaa|interface|ip|switch|system
> [options]
no snmp-server trap-destination
<ip>
interface port-channel <port-
list>
snmp trap [options]
no snmp trap [options]
Chapter 80 SNMP Server Commands
DESCRIPTION
Sets the trap community. Only for SNMPv2c or lower.
cipher: inform the Switch that the string after the word
"cipher" is an encrypted secret. This is used in password
encryption. To encrypt the password, use the password
encryption command.
Sets the IP addresses of up to four SNMP managers
(stations to send your SNMP traps to). You can configure
up to four managers.
Sets the types of SNMP traps that should be sent to the
specified SNMP manager.
options: enter the trap type you want to configure here,
such as timesync, intrusionlock, loopguard, errdisable, poe,
loginrecord, linkup, linkdown, autonegotiation, lldp,
transceiver-ddm, storm-control, zuld, authentication,
authorization, accounting, ping, traceroute, stp,
mactable, rmon, cfm, or classifier.
Deletes the specified SNMP manager.
Enters config-interface mode for the specified port(s).
Enables sending of SNMP traps on this port. The Switch
sends the related traps received on this port to the SNMP
manager.
options: enter the trap type you want to configure here,
such as intrusionlock, loopguard, errdisable, poe, linkup,
linkdown, autonegotiation, lldp, transceiver-ddm, storm-
control, or zuld.
Disables sending of SNMP traps on this port. The Switch
sends the related traps received on this port to the SNMP
manager.
options: enter the trap type you want to configure here,
such as intrusionlock, loopguard, errdisable, poe, linkup,
linkdown, autonegotiation, lldp, transceiver-ddm, storm-
control, or zuld.
Ethernet Switch CLI Reference Guide
297
M
P
C
13
C
13
C
13
C
13
C
13
C
13
C
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents