ZyXEL Communications XS3800-28 Cli Reference Manual page 284

• alarm index number: 2
• variable: getting the number of errored packets received on port 1
• how often to get a data sample: every 60 seconds
• sampling method: delta
• when to send an alarm: when the value is higher than the rising threshold
• the rising threshold: 50
• which event's action should be taken for the rising alarm: 2 (see
• the falling threshold: 0
• which event's action should be taken for the falling alarm: 0 (see
• who will handle this alarm: operator
This example also shows how to display the setting results.
ras# config
ras(config)# rmon alarm alarmtable 2 variable ifInErrors.1 interval 60 sample-type
delta startup-alarm rising rising-threshold 50 2 falling-threshold 0 2 owner operator
ras(config)# exit
ras# show rmon alarm alarmtable
Alarm 2 owned by operator is valid
alarmVariable: ifInErrors.1
alarmInterval: 60
alarmSampleType: delta
alarmStartupAlarm: rising
alarmRisingThreshold: 50
alarmRisingEventIndex: 2
alarmFallingThreshold: 0
alarmFallingEventIndex: 0
Last value monitored: 0
ras#
75.3.3 RMON Statistics Command Example
This example shows how to configure the settings to display current network traffic statistics using the
following settings:
• the Ethernet statistics table entry's index number: 1
• collecting data samples from which port: 12
Chapter 75 RMON
Ethernet Switch CLI Reference Guide
284
Section 75.3.1 on page 282)
Section 75.3.1 on page 282)