ZyXEL Communications XS3800-28 Cli Reference Manual page 31

Table 12 anti arpscan Command Summary (continued)
COMMAND
clear anti arpscan host
clear anti arpscan host
interface port-channel <port-
list>
interface port-channel <port-
list>
anti arpscan trust
no anti arpscan
no anti arpscan host threshold
no anti arpscan port threshold
no anti arpscan trust host <ip-
address> <mask>
show anti arpscan
show anti arpscan host
Chapter 5 Anti-Arpscan
DESCRIPTION
Unblocks all hosts.
Unblocks all hosts connected to the specified port(s).
Enters config-interface mode for the specified port(s).
Sets the port as a trusted port. This prevents the port from
being shutdown due to receiving too many ARP
messages.
Disables Anti-arpscan on the Switch.
Resets the host threshold to its default value.
Resets the port threshold to its default value.
Removes a trusted host.
Displays what ports are trusted and are forwarding traffic
or are disabled.
Displays the host that has been blocked.
Ethernet Switch CLI Reference Guide
31
M P
E 13
E 13
C 13
C 13
C 13
C 13
C 13
C 13
E 3
E 3