ZyXEL Communications XS3800-28 Cli Reference Manual page 176
Hide thumbs
Also See for XS3800-28:
- User manual (789 pages) ,
- Quick start manual (2 pages) ,
- User manual (648 pages)
Table of Contents
Advertisement
Table 123 l2pt Command Summary (continued)
COMMAND
l2protocol-tunnel point-to-
point udld
l2protocol-tunnel stp
l2protocol-tunnel vtp
no l2protocol-tunnel
no l2protocol-tunnel cdp
no l2protocol-tunnel point-to-
point
no l2protocol-tunnel point-to-
point lacp
no l2protocol-tunnel point-to-
point pagp
no l2protocol-tunnel point-to-
point udld
no l2protocol-tunnel stp
no l2protocol-tunnel vtp
l2protocol-tunnel
l2protocol-tunnel mac <mac-addr>
no l2protocol-tunnel
show l2protocol-tunnel
show l2protocol-tunnel interface
port-channel <port-list>
43.2 Command Examples
This example enables L2PT on the Switch and sets the destination MAC address for encapsulating layer 2
protocol packets received on an access port.
sysname# configure
sysname(config)# l2protocol-tunnel
sysname(config)# l2protocol-tunnel mac 00:10:23:45:67:8e
sysname(config)#
Chapter 43 Layer 2 Protocol Tunnel (L2PT) Commands
Ethernet Switch CLI Reference Guide
DESCRIPTION
Enables point-to-point layer 2 protocol tunneling for
UDLD packets on the specified port(s).
Enables layer 2 protocol tunneling for STP packets on
the specified port(s).
Enables layer 2 protocol tunneling for CDP packets on
the specified port(s).
Disables layer 2 protocol tunneling for CDP, VTP and
STP packets on the specified port(s).
Disables layer 2 protocol tunneling for CDP packets on
the specified port(s).
Disables point-to-point layer 2 protocol tunneling for
LACP, PAgP and UDLD packets on the specified
port(s).
Disables point-to-point layer 2 protocol tunneling for
LACP packets on the specified port(s).
Disables point-to-point layer 2 protocol tunneling for
PAgP packets on the specified port(s).
Enables point-to-point layer 2 protocol tunneling for
UDLD packets on the specified port(s).
Disables layer 2 protocol tunneling for STP packets on
the specified port(s).
Disables layer 2 protocol tunneling for VTP packets on
the specified port(s).
Enables layer 2 protocol tunneling on the Switch.
Sets the destination MAC address used for
encapsulating layer 2 protocol packets received on
an access port.
Disables layer 2 protocol tunneling on the Switch.
Displays layer 2 protocol tunneling settings and
counters for all ports.
Displays layer 2 protocol tunneling settings and
counters for the specified port(s).
176
M
P
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
E
13
E
13
Hide quick links:
Advertisement
Table of Contents
