ZyXEL Communications XS3800-28 Cli Reference Manual page 68

Figure 3 Trunk - Access Mode Example
Table 41 vlan Command Summary
COMMAND
show vlan
show vlan <vlan-id>
Table 42 clv Command Summary
COMMAND
clv
no clv
Table 43 switchport mode Command Summary
COMMAND
interface port-channel <port-
list>
switchport mode
<access|trunk|hybrid>
no switchport mode
Chapter 17 CLV Commands
DESCRIPTION
Displays the status of all VLANs.
Displays the status of the specified VLAN.
DESCRIPTION
Enables clv mode.
Disables clv mode.
DESCRIPTION
Enters config-interface mode for the specified port(s).
Specifies VLAN configuration mode on the specified
port(s).
• Use Access to untag outgoing frames with a VLAN ID.
• Use Trunk to tag outgoing frames with a VLAN ID.
• Use Hybrid to tag or untag outgoing frames with a
VLAN ID.
Resets VLAN configuration mode to the default switchport
mode. The default switchport mode is hybrid mode.
Ethernet Switch CLI Reference Guide
68
M P
E 3
E 3
M P
C 13
C 13
M P
C 13
C 13
C 13