ZyXEL Communications XS3800-28 Cli Reference Manual page 266

Primary PVLAN 100 is then mapped to port 2 on the Switch and outgoing frames from port 2 will be
tagged.
sysname# configure
sysname(config)# vlan 100
sysname(config-vlan)# private-vlan primary
sysname(config-vlan)# exit
sysname(config)# vlan 101
sysname(config-vlan)# private-vlan community
sysname(config-vlan)# exit
sysname(config)# vlan 102
sysname(config-vlan)# private-vlan isolated
sysname(config-vlan)# exit
sysname(config)# vlan 100
sysname(config-vlan)# private-vlan association 101,102
sysname(config-vlan)# exit
sysname(config)# exit
sysname# show vlan private-vlan
Private Vlan:
Primary Secondary
------- ---------
100
100 102
100 101
sysname#
sysname# configure
sysname(config)# interface port-channel 2
sysname(config-interface)# private-vlan mode promiscuous association 100
dot1q tagged
sysname(config-interface)# exit
sysname(config)#
Chapter 69 Private VLAN Commands
Type
---------- --------------------
Primary
Isolated
Community
Ethernet Switch CLI Reference Guide
266
Ports
-->