ZyXEL Communications XS3800-28 Cli Reference Manual page 230

Table 158 OSPF Command Summary (continued)
COMMAND
show router ospf area
show router ospf network
show router ospf redistribute
show router ospf virtual-link
interface route-domain <ip-address>/<mask-
bits>
ip ospf authentication-key <key>
no ip ospf authentication-key <key>
ip ospf authentication-same-aa
ip ospf authentication-same-as-area
no ip ospf authentication-same-aa
no ip ospf authentication-same-as-area
ip ospf cost <1-65535>
no ip ospf cost <1-65535>
ip ospf retransmit-interval <1-65535>
ip ospf transmit-delay <1-65535>
ip ospf dead-interval <1-65535>
ip ospf hello-interval <1-65535>
ip ospf message-digest-key <key>
no ip ospf message-digest-key <key>
ip ospf priority <0-255>
no ip ospf priority <0-255>
interface vlan <vlan-id>
ipv6 ospf cost <1-65535>
ipv6 ospf dead-interval <1-65535>
ipv6 ospf hello-interval <1-65535>
Chapter 61 OSPF Commands
Ethernet Switch CLI Reference Guide
230
DESCRIPTION
Displays OSPF area settings.
Displays OSPF network (or interface) settings.
Displays OSPF redistribution settings.
Displays OSPF virtual link settings.
Enters the configuration mode for this
routing domain.
Specifies the authentication key for OSPF.
Disables OSPF authentication in this routing
domain.
Sets the same OSPF authentication settings
in the routing domain as the associated
area.
Sets the same OSPF authentication settings
in the routing domain as the associated
area.
Sets the routing domain not to use the same
OSPF authentication settings as the area.
Sets the routing domain not to use the same
OSPF authentication settings as the area.
Sets the OSPF cost in this routing domain.
Resets the OSPF cost in the routing domain
to default.
Sets the OSPF retransmission interval in this
routing domain.
Sets the OSPF transmission delay in this
routing domain.
Sets the OSPF dead interval in this routing
domain.
Sets the OSPF hello interval in this routing
domain.
Sets the OSPF authentication key in this
routing domain.
Disables the routing domain from using a
security key in OSPF.
Sets the OSPF priority for the interface.
Setting this value to 0 means that this router
will not participate in router elections.
Resets the OSPF priority for the interface.
Enters the configuration mode for this VLAN
interface.
Sets the IPv6 OSPF cost in this VLAN
interface.
Sets the IPv6 OSPF dead interval in this VLAN
interface.
Sets the IPv6 OSPF hello interval in this VLAN
interface.
M P
E 3
E 3
E 3
E 3
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13