ZyXEL Communications XS3800-28 Cli Reference Manual page 187

Chapter 44 Link Layer Discovery Protocol (LLDP) Commands
This example shows local Switch (the Switch you're accessing) LLDP information on a port.
sysname# show lldp info local interface port-channel 2
LLDP Local Device Information Detail:
Local Port:
Port ID Subtype: local-assigned
Port ID:
Port Description:
Extended TLV Info 802.1 OUI (hex value) = 00-80-c2
-Port VLAN ID
-DCBX Application Priority
- ether-type:
-DCBX ETS Configuration
-Willing Bit: False
-Max Traffic Classes:
-Priority-Group
-Priority-Group
-Priority-Group
-DCBX PFC Configuration
-Willing Bit:
-PFC capability:
-Priority enable list: 0-2
Extended TLV Info 802.3 OUI (hex value) = 00-12-0f
-MAC PHY Configuration & Status
-AN Supported:
-AN Enabled:
-AN Advertised Capability:
-Oper MAU type: 30
-Link Aggregation
-Capability:
-Status:
-Port ID:
-Max Frame Size
-Frame Size:
--------------------------------------------------
sysname#
The following table describes the labels in this screen.
Local Switch LLDP information on a port
Table 130
LABEL
LLDP Local Device
Information Detail
Port VLAN ID
DCBX Application Priority
DCBX ETS Configuration
DCBX PFC Configuration
MAC PHY Configuration &
Status
Link Aggregation
Max Frame Size
2
2
-ID: 1
fcoe Priority:
3
2: Strict-priority, Priority-list:7
1: ETS Bandwidth
0: ETS Bandwidth
True
8
Y
Y
1000baseTFD
Y
N
2
1518
DESCRIPTION
This displays the local port, port ID, and port description.
This displays the VLAN ID for this port.
This displays the priority given to FCoE traffic on the Switch.
This displays the Willing Bit, Max Traffic Classes, and Traffic Class binding for each
priority.
This displays the Willing Bit, PFC capability, and priority enable list.
This displays the AN Supported, AN Enabled, AN Advertised Capability, Oper MAU type
This displays the capability, status, and port ID.
This displays the maximum frame size on this port.
Ethernet Switch CLI Reference Guide
187
2
50%, Priority-list:3-6
50%, Priority-list:0-2