ZyXEL Communications XS3800-28 Cli Reference Manual page 106

Table 78 show ethernet oam statistics (continued)
LABEL
Event Notification
OAMPDU Tx
Event Notification
OAMPDU Rx
Loopback Control
OAMPDU Tx
Loopback Control
OAMPDU Rx
Variable Request
OAMPDU Tx
Variable Request
OAMPDU Rx
Variable Response
OAMPDU Tx
Variable Response
OAMPDU Rx
Unsupported OAMPDU Tx
Unsupported OAMPDU Rx
This example looks at the configuration of ports on which OAM is enabled.
sysname# show ethernet oam summary
OAM Config: U : Unidirection, R : Remote Loopback
L : Link Events , V : Variable Retrieval
Local Remote
------------- -----------------------------------------
Port Mode MAC Addr
----- ------- ----------------- ------ ------- --------
1 Active
The following table describes the labels in this screen.
Table 79 show ethernet oam summary
LABEL
Local
Port
Mode
Remote
MAC Addr
OUI
Mode
Config
Chapter 27 Ethernet OAM Commands
DESCRIPTION
This field displays the number of unique or duplicate OAM event notification PDUs sent
on the port.
This field displays the number of unique or duplicate OAM event notification PDUs
received on the port.
This field displays the number of loopback control OAM PDUs sent on the port.
This field displays the number of loopback control OAM PDUs received on the port.
This field displays the number of OAM PDUs sent to request MIB objects on the remote
device.
This field displays the number of OAM PDUs received requesting MIB objects on the
Switch.
This field displays the number of OAM PDUs sent by the Switch in response to requests.
This field displays the number of OAM PDUs sent by the remote device in response to
requests.
This field displays the number of unsupported OAM PDUs sent on the port.
This field displays the number of unsupported OAM PDUs received on the port.
OUI Mode
DESCRIPTION
This section displays information about the ports on the Switch.
This field displays the port number.
This field displays the operational state of the port.
This section displays information about the remote device.
This field displays the MAC address of the remote device.
This field displays the OUI (first three bytes of the MAC address) of the remote device.
This field displays the operational state of the remote device.
This field displays the capabilities of the Switch and remote device. THe capabilities are
identified in the OAM Config section.
Ethernet Switch CLI Reference Guide
106
Config