ZyXEL Communications XS3800-28 Cli Reference Manual page 12

1.4 Saving Your Configuration
When you run a command, the Switch saves any changes to its run-time memory. The Switch loses these
changes if it is turned off or loses power. Use the
current configuration permanently to non-volatile memory.
sysname# write memory
Note: You should save your changes after each CLI session. All unsaved configuration
changes are lost once you restart the Switch.
1.5 Logging Out
Enter
logout
page 13 for more information about modes.
Chapter 1 How to Access and Use the CLI
to log out of the CLI. You have to be in user, enable, or config mode. See
Ethernet Switch CLI Reference Guide
command in enable mode to save the
write memory
12
Chapter 2 on