ZyXEL Communications XS3800-28 Cli Reference Manual page 210

Table 148 rmirror Command Summary
COMMAND
rmirror vlan <vlan-id>
connected-port <port-list>
no connected-port <port-
list>
destination monitor-port
<port-num>
<untagged|tagged>
no destination monitor-port
inactive
no inactive
source 8021p-priority <0 -
7>
source mirror-port <port-
list> dir
<ingress|egress|both>
no source mirror-port <port-
list>
no source mirror-port <port-
list> dir egress
no source mirror-port <port-
list> dir ingress
source reflector-port
source reflector-port <port-
num>
no source reflector-port
no rmirror vlan <vlan-id>
show rmirror vlan
show rmirror vlan <vlan-id>
55.2 Command Examples
This example enables port mirroring and copies outgoing traffic from ports 1, 4, 5, and 6 to port 3.
sysname(config)# mirror-port
sysname(config)# mirror-port 3
sysname(config)# interface port-channel 1,4-6
sysname(config-interface)# mirror
sysname(config-interface)# mirror dir egress
Chapter 55 Mirror Commands
DESCRIPTION
Enters config-rmirror mode to create a remote port mirroring
(RMirror) VLAN through which the mirrored traffic is forwarded.
Sets the port(s) that helps forward mirrored traffic to other
connected switches and/or receive mirrored traffic from other
connected port in the same RMirror VLAN.
Removes the specified connected port(s) from this RMirror
VLAN.
Sets the port to which you copy the traffic in order to examine it
in more detail without interfering with the traffic flow on the
original port(s). You can also set whether to add the RMirror
VLAN tag to mirrored traffic on the monitor port.
Removes the destination monitor port from this RMirror VLAN.
Disables the RMirror VLAN.
Enables the RMirror VLAN.
Sets the priority of the mirrored traffic in this VLAN.
Sets the port(s) on which traffic is mirrored and the traffic flow
to be copied to the monitor port when the Switch is the source
device in remote port mirroring.
Sets the Switch to not mirror any traffic on the specified port(s).
Sets the Switch to not mirror outgoing (egress) traffic on the
specified port(s).
Sets the Switch to not mirror incoming (ingress) traffic on the
specified port(s).
Enables the source reflector port.
Sets the port that adds the RMirror VLAN tag to all mirrored
traffic and forwards traffic to the connected port(s) in the same
RMirror VLAN.
Removes the source reflector port.
Removes the specified RMirror VLAN.
Displays all RMirror VLANs settings on the Switch.
Displays the specified RMirror VLAN settings.
Ethernet Switch CLI Reference Guide
210
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 3
E 3