ZyXEL Communications XS3800-28 Cli Reference Manual page 235

Table 158 OSPF Command Summary (continued)
COMMAND
redistribute rip metric-type <1|2>
metric <0-16777215>
redistribute static
no redistribute static
redistribute static metric-type <1|2>
metric <0-16777215>
no router ospf
no ipv6 router ospf
61.3 Command Examples
In this example, the Switch (A) is an Area Border Router (ABR) in an OSPF network.
Figure 9 OSPF Network Example
This example enables OSPF on the Switch, sets the router ID to 172.16.1.1, configures an OSPF area ID as
0.0.0.0 (backbone) and enables simple authentication.
sysname(config)# router ospf 172.16.1.1
sysname(config-ospf)# area 0.0.0.0
sysname(config-ospf)# area 0.0.0.0 authentication
sysname(config-ospf)# area 0.0.0.0 name backbone
sysname(config-ospf)# network 172.16.1.1/24 area 0.0.0.0
sysname# show router ospf area
index:1
area-id:0.0.0.0
stub-active:N stub-no-sum:N
Chapter 61 OSPF Commands
Area 1
A
active:Y
Ethernet Switch CLI Reference Guide
DESCRIPTION
Sets the Switch to learn RIP routing
information which will use the specified
metric information.
Sets the switch to redistribute static routing
information.
Route redistribution allows your Switch to
import and translate external routes
learned through other routing protocols (RIP
and Static) into the OSPF network
transparently.
Sets the Switch not to learn static routing
information.
Sets the Switch to learn static routing
information which will use the specified
metric information.
Disables OSPF on the Switch.
Disables OSPFv3 for IPv6 on the Switch.
Area 0
Backbone
IP: 172.16.1.1
name:backbone
auth:SIMPLE
default-cost:15
235
M P
C 13
C 13
C 13
C 13
C 13
C 13