Quick Start Guide
Hardware Connections
Connect a broadband modem or
router (1-a) using an Ethernet cable.
OR
1
Connect a DSL splitter (1-b) using
the gray telephone cable.
OR
Connect a switch or PON device (1-c)
that has Internet access by using an
SFP active optical fiber cable,
SFP Direct Copper (DAC) cable,
PON SFP transceiver module or SFP
transceiver module.
2
Connect a computer using the
yellow Ethernet cable.
3
Connect a USB memory stick for file
sharing.
4
Connect the power adapter.
5
Check LEDs.
Internet Setup
IP Address: 192.168.1.1
1/2
Dual-Band Wireless AC/N VDSL2 Bonding
4
POWER
3
1-a
WAN
INTERNET
2
ETHERNET
1-c
1-b
Gateway with USB
USB
SFP
DSL
Username: admin
Password: 1234
Copyright © 2016 Zyxel Communications Corp. All Rights Reserved
XMG3512-B10A
5
DSL1
DSL2
SFP
INTERNET
ON
INTERNET
OFF
W
iFi 2.4G
WiFi 5G
Quick Start
Internet is ready.
Go to Wireless Setup.
Internet is not ready.
Go to Internet Setup.