Remote Management Commands - ZyXEL Communications XS3800-28 Cli Reference Manual

Use these commands to specify a group of one or more "trusted computers" from which an
administrator may use one or more services to manage the Switch and to decide what services you
may use to access the Switch.
73.1 Command Summary
The following table describes user-input values available in multiple commands for this feature.
Table 174 remote-management User-input Values
COMMAND
index
The following section lists the commands for this feature.
Table 175 remote-management Command Summary
COMMAND
show remote-management [index]
remote-management <index>
no remote-management <index>
remote-management <index> start-
addr <ip> end-addr <ip> service
<[telnet] [ftp] [http] [icmp]
[snmp] [ssh] [https]>
no remote-management <index>
service <[telnet] [ftp] [http]
[icmp] [snmp] [ssh] [https]>
Table 176 service-control Command Summary
COMMAND
show service-control
service-control console
<timeout>
service-control ftp
service-control ftp <socket-
number> <timeout>
Remote Management
DESCRIPTION
1-4
Ethernet Switch CLI Reference Guide
C
H A P T E R
Commands
DESCRIPTION
Displays all secured client information or, optionally, a
specific group of secured clients.
Enables the specified group of trusted computers.
Disables the specified group of trusted computers.
Specifies a group of trusted computer(s) from which an
administrator may use the specified service(s) to manage
the Switch. Group 0.0.0.0 - 0.0.0.0 refers to every
computer.
Disables the specified service(s) for the specified group of
trusted computes.
DESCRIPTION
Displays service control settings.
Defines the timeout period (in minutes) for a management
session via the console port.
Allows FTP access to the Switch.
Specifies the service port for the FTP service and defines
the timeout period (in minutes).
275
73
M P
E 3
C 13
C 13
C 13
C 13
M P
E 3
C 13
C 13
C 13