ZyXEL Communications XS3800-28 Cli Reference Manual page 56

This example lists all CFM domains. In this example, only one MD (MD1) is configured. The MA3 with the
associated MEP port 1 is under this MD1.
sysname# show ethernet cfm local
MD Index: 1
MD Name: MD1(string)
MD Level: 1
MA Index: 3
MA Name:
Primary Vlan:
CC Interval:
MHF Creation:
ID Permission:
MEP:301 (ACTIVE
sysname#
This example starts a loopback test and displays the test result on the console.
sysname# ethernet cfm loopback remote-mep 2 mep 1 ma 1 md 1
Sending 5 Ethernet CFM Loopback messages to remote-mepid 2, timeout is 5
seconds .....
sysname# Loopback: Successful
Success rate is 100 percent, round-trip min/avg/max = 0/0/0 ms
sysname#
This example displays all neighbors' MEP port information in the MIP-CCM databases.
sysname# show ethernet cfm local stack mip mip-ccmdb
MIP CCM DB
Port VID Source Address
---- ---- -----------------
2 1 00:19:cb:00:00:04
7 1 00:19:cb:00:00:06
sysname#
The following table describes the labels in this screen.
Table 33 show cfm-action mipccmdb
LABEL
Port
VID
Source Address
Retained
Chapter 13 CFM Commands
MA3(string)
123
1000 millisecond(s)
default
none
) Port:1 Direction:DOWN
Retained
---------
0 hr(s)
0 hr(s)
DESCRIPTION
Displays the number of the port on which this CCM was received.
Displays the MA VLAN ID of the last received CCM.
Displays the MAC address of the remote MEP.
Displays how long an entry has been kept in the database.
Ethernet Switch CLI Reference Guide
56
Priority:5 CC-Enable:FALSE