ZyXEL Communications XS3800-28 Cli Reference Manual page 191

Table 132 load-sharing Command Summary (continued)
COMMAND
ip load-sharing maximum-path
no ip load-sharing
45.3 Command Examples
This example enables Equal-Cost MultiPath (ECMP) routing on the Switch and sets the Switch to use a
packet's source and destination IP addresses to determine the routing path for the packet.
sysname# configure
sysname(config)# ip load-sharing
sysname(config)# ip load-sharing sip-dip
sysname(config)#
Chapter 45 Load Sharing Commands
DESCRIPTION
Set the maximum number of paths for one ECMP (Equal-
Cost MultiPath) route.
Disables load sharing on the Switch.
Ethernet Switch CLI Reference Guide
191
M P
C 13
C 13