ZyXEL Communications XS3800-28 Cli Reference Manual page 112
Hide thumbs
Also See for XS3800-28:
- User manual (789 pages) ,
- Quick start manual (2 pages) ,
- User manual (648 pages)
Table of Contents
Advertisement
Table 82 green-ethernet Command Summary (continued)
COMMAND
no green-ethernet short-reach
interface port-channel <port-list>
green-ethernet auto-power-down
no green-ethernet auto-power-
down
green-ethernet eee
no green-ethernet eee
green-ethernet short-reach
no green-ethernet short-reach
show green-ethernet auto-power-down
show green-ethernet eee
show green-ethernet short-reach
30.3 Green Ethernet Command Example
In this example, the Switch supports EEE and auto power down per port, and short reach globally. The
following are explanations of the Status parameters:
EEE
• Active displays when EEE is enabled and the EEE port is up
• Inactive displays when EEE is enabled but the EEE port is down or the device connected to this port
does not support EEE
• Unsupported means the Switch cannot display the status.
• - means EEE is not enabled
Auto power down
• Normal means auto power down has not reduced the power on this link
• Power down means auto power down has reduced the power on this link
• Unsupported means the Switch cannot display the status.
• - means auto power down is not enabled
Short reach
• Normal means short reach has not reduced the power on this link
• Low power means short reach has reduced the power on this link
• Unsupported means the Switch cannot display the status.
Chapter 30 Green Ethernet Commands
DESCRIPTION
Disables short-reach on the Switch.
Enters config-interface mode for the specified port(s).
Enables automatic power down on the specified
port(s).
Disables automatic power down on the specified
port(s).
Enables IEEE 802.3az Energy Efficient Ethernet on the
specified port(s).
Disable IEEE 802.3az Energy Efficient Ethernet on the
specified port(s).
Enables adjusting the transmit power of the specified
port(s) according to the length of cable attached to
the port.
Disables adjusting the transmit power of the specified
port(s) according to the length of cable attached to
the port.
Shows automatic power down information.
Shows Energy Efficient Ethernet information.
Shows short reach information.
Ethernet Switch CLI Reference Guide
112
M
P
E
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
E
3
E
3
E
3
Hide quick links:
Advertisement
Table of Contents
