ZyXEL Communications XS3800-28 Cli Reference Manual page 101

Chapter 26 Error Disable and Recovery Commands
300 seconds (the default value) later. This example also shows the number of the disabled port(s) and
the time left before the port(s) becomes active.
sysname# configure
sysname(config)# errdisable recovery
sysname(config)# errdisable recovery cause loopguard
sysname(config)# exit
sysname# show errdisable recovery
Errdisable Recovery Status:Enable
Reason
----------
loopguard
ARP
BPDU
IGMP
Interfaces that will be enabled at the next timeout:
Interface Reason
--------- ----------
sysname#
Timer Status
------------
Enable
Disable
Disable
Disable
Time left(sec)
--------------
Ethernet Switch CLI Reference Guide
101
Time
-------
300
300
300
300
Mode
---------------