ZyXEL Communications XS3800-28 Cli Reference Manual page 11

Table 3 Default Management IP Address
SETTING
IP Address
Subnet Mask
Make sure your computer IP address is in the same subnet, unless you are accessing the Switch through
one or more routers.
1.1.3 SSH
Connect your computer to one of the Ethernet ports.
1
Use a SSH client program to access the Switch. If this is your first login, use the default values in
2
page 11 and
are accessing the Switch through one or more routers.
1.2 Logging in
Use the administrator username and password. If this is your first login, use the default values.
Table 4 Default User Name and Password
SETTING
User Name
Password
Note: The Switch automatically logs you out of the management interface after five minutes
of inactivity. If this happens to you, simply log back in again.
1.3 Using Shortcuts and Getting Help
This table identifies some shortcuts in the CLI, as well as how to get help.
Table 5 CLI Shortcuts and Help
COMMAND / KEY(S)
history

(up/down arrow keys)
[CTRL]+U
[TAB]
?
help
Chapter 1 How to Access and Use the CLI
DEFAULT VALUE
192.168.1.1
255.255.255.0
Table 4 on page 11. Make sure your computer IP address is in the same subnet, unless you
DEFAULT VALUE
admin
1234
DESCRIPTION
Displays a list of recently-used commands.
Scrolls through the list of recently-used commands. You can edit any
command or press [ENTER] to run it again.
Clears the current command.
Auto-completes the keyword you are typing if possible. For example, type
config, and press [TAB]. The Switch finishes the word configure.
Displays the keywords and/or input values that are allowed in place of the ?.
Displays the (full) commands that are allowed in place of help.
Ethernet Switch CLI Reference Guide
11
Table 3 on