ZyXEL Communications XS3800-28 Cli Reference Manual page 21

Use this command to check the settings for auto configuration.
6
show running-config
GS2210# show running-config
Building configuration...
Current configuration:
vlan 1
name 1
normal ""
fixed 1-50
forbidden ""
untagged 1-50
ip address default-management dhcp-bootp
ip address default-management dhcp-bootp option-60 class-id ZyxelCorp
exit
pwr mode consumption
auto-config
You need to save the current configuration in a configuration file, so the Switch will load the auto
7
configuration files from the TFTP server automatically when rebooting
Use this command to save the current configuration in a configuration file.
write memory [<index>]
For [<index>], you can enter a value to save the current configuration to a specified configuration file.
1 is for Config 1, and 2 is for Config 2.
In this example, we save the current configuration to Config 1.
sysname# write memory 1
........................................................................
............................
Use this command to reboot the Switch.
8
reload config [1|2]
For [1|2], 1 is for Config 1, and 2 is for Config 2.
In this example, we load Config 1 to reboot the Switch.
Chapter 3 Initial Setup
Ethernet Switch CLI Reference Guide
21