ZyXEL Communications XS3800-28 Cli Reference Manual page 263

Table 167 private-vlan (legacy) Command Summary (continued)
COMMAND
private-vlan name <name> vlan
<vlan-id> promiscuous-port
<port-list>
private-vlan name <name> vlan
<vlan-id> promiscuous-port
<port-list> inactive
private-vlan name <name> vlan
<vlan-id>
private-vlan name <name> vlan
<vlan-id> inactive
show private-vlan
show private-vlan <vlan-id>
69.1.2 Command Examples
This example sets a private VLAN rule (pvlan-123) that applies to VLAN 123. Ports 7 and 8 are the
promiscuour ports in VLAN 123. Other ports in this VLAN are added to the isolated port list automatically
and cannot communicate with each other. The isolated ports in VLAN 123 can send and receive traffic
from ports 7 and 8. This example also shows all private VLAN rules configured on the Switch.
sysname# configure
sysname(config)# private-vlan name pvlan-123 vlan 123 promiscuous-port 7-8
sysname(config)# exit
sysname# show private-vlan
Private VLAN: 123
Name
------------ --------------------------
pvlan-123
sysname#
This example sets a private VLAN rule (pvlan-111) that applies to VLAN 111. Ports 1, 2 and 24 belong to
VLAN 111. Ports 1 and 2 are added to the isolated port list automatically and cannot communicate with
each other. Port 24 is the uplink port and also the promiscuous port in this VLAN. The isolated ports in
Chapter 69 Private VLAN Commands
Active: Yes
Promiscuous Port
7-8
Ethernet Switch CLI Reference Guide
DESCRIPTION
Sets a private VLAN rule. You specify which port(s) in a
VLAN is not isolated by adding it to the promiscuous port
list. The Switch automatically adds other ports in this VLAN
to the isolated port list and block traffic between the
isolated ports.
Enter a name, VLAN ID and the promiscuous ports. You
can enter individual ports separated by a comma or a
range of ports by using a dash. For example, 1,3,5-8
indicates ports 1 and 3 and ports 5 through 8 are the
promiscuous ports.
Disables a private VLAN rule.
Sets a private VLAN rule for the specified VLAN. The Switch
automatically adds all ports (except the uplink port(s)) in
this VLAN to the isolated port list and blocks traffic
between the isolated ports. The uplink ports in the VLAN
are always in the promiscuous port list.
Disables a private VLAN rule.
Displays the settings and status of all private VLAN rules on
the Switch.
Displays the settings and status of the specified private
VLAN rule on the Switch.
263
M P
C 13
C 13
C 13
C 13
E 3
E 3