ZyXEL Communications XS3800-28 Cli Reference Manual page 23

Use this command to save the current configuration settings permanently to a customized default file on
2
the Switch.
copy running-config custom-default
sysname# copy running-config custom-default
........................................................................
............................
Use this command to reboot the system and load a saved customized default file on the Switch.
3
reload custom-default
sysname# reload custom-default
Do you really want to restore system to custom default settings and
reboot?[y/N]y
.......
Bootbase Version: V1.05 | 12/19/2013 16:57:54
DRAM calibration...PASSED
RAM: Size = 131072 Kbytes
ZyNOS Version: V4.50(AAHW.0)b3_20171020_1 | 10/20/2017 16:9:36
Press any key to enter debug mode within 1 second.
....................
(Compressed)
Version: GS2210, start: b4962430
Length: 16F0668, Checksum: 03AA
Compressed Length: 2EE424, Checksum: 87A5
Copyright (c) 1994 - 2017 Zyxel Communications Corp.
initialize mgmt, initialize switch, ethernet address: 00:19:cb:00:00:01
Initializing MSTP.............
Initializing VLAN Database...
Initializing IP Interface...
Initializing Advanced Applications...
Initializing Command Line Interface...
Initializing Web Interface...
Restore System Configuration...
Press ENTER to continue...
3.8 Looking at Basic System Information
Use this command to look at general system information about the Switch.
show system-information
Chapter 3 Initial Setup
Ethernet Switch CLI Reference Guide
23