ZyXEL Communications XS3800-28 Cli Reference Manual page 282

Table 180 rmon Command Summary (continued)
COMMAND
show rmon statistics etherstats [index
<etherstats-index>]
show rmon statistics etherstats port-
channel <interface-id>
75.3.1 RMON Event Command Example
This example shows how to configure the Switch's action when an RMON event using the following
settings:
• event index number: 2
• enable event logging and SNMP traps: Yes
• the trap's community: public
• who will handle this alarm: operator
• additional description for this event entry: test
This example also shows how to display the setting results.
ras# config
ras(config)# rmon event eventtable 2 log trap public owner operator description test
ras(config)# exit
ras# show rmon event eventtable 2
Event 2 owned by operator is valid
eventType: logandtrap
eventCommunity: public
eventDescription: test
75.3.2 RMON Alarm Command Example
Syntax:
rmon alarm alarmtable <alarm-index> variable <variable> interval <interval-integer>
sample-type <absolute|delta> startup-alarm <startup-alarm> rising-threshold
<rising-integer> <event-index> falling-threshold <falling-integer> <event-index>
[owner <owner>]
Chapter 75 RMON
Ethernet Switch CLI Reference Guide
282
DESCRIPTION
Displays all current network traffic statistics or
only the specified entry's.
Displays current network traffic statistics for
the specified port.
M P
E 3
E 3