ZyXEL Communications XS3800-28 Cli Reference Manual page 43

Table 26 Command Summary: bandwidth-control & bandwidth-limit (continued)
COMMAND
bandwidth-limit ingress
bandwidth-limit ingress
<rate>
bandwidth-limit egress
bandwidth-limit egress
<rate>
no bandwidth-limit ingress
no bandwidth-limit egress
bandwidth-limit cir
bandwidth-limit cir <rate>
bandwidth-limit pir
bandwidth-limit pir <rate>
no bandwidth-limit cir
no bandwidth-limit pir
10.2 Command Examples: ingress
This example sets the outgoing traffic bandwidth limit to 5000 Kbps and the incoming traffic bandwidth
limit to 4000 Kbps for port 1.
sysname# configure
sysname(config)# bandwidth-control
sysname(config)# interface port-channel 1
sysname(config-interface)# bandwidth-limit egress 5000
sysname(config-interface)# bandwidth-limit ingress 4000
sysname(config-interface)# exit
sysname(config)# exit
This example deactivates the outgoing bandwidth limit on port 1.
sysname# configure
sysname(config)# interface port-channel 1
sysname(config-interface)# no bandwidth-limit egress
sysname(config-interface)# exit
sysname(config)# exit
Chapter 10 Bandwidth Commands
DESCRIPTION
Enables bandwidth limits for incoming traffic on the port(s). C
Sets the maximum bandwidth allowed for incoming traffic
on the port(s).
Enables bandwidth limits for outgoing traffic on the port(s).
Sets the maximum bandwidth allowed for outgoing traffic
on the port(s).
Disables ingress bandwidth limits on the specified port(s).
Disables egress bandwidth limits on the specified port(s).
Enables commit rate limits on the specified port(s).
Sets the guaranteed bandwidth allowed for the incoming
traffic flow on a port. The commit rate should be less than
the peak rate. The sum of commit rates cannot be greater
than or equal to the uplink bandwidth.
Note: The sum of CIRs cannot be greater than or
equal to the uplink bandwidth.
Enables peak rate limits on the specified port(s).
Sets the maximum bandwidth allowed for the incoming
traffic flow on the specified port(s).
Disables commit rate limits on the specified port(s).
Disables peak rate limits on the specified port(s).
Ethernet Switch CLI Reference Guide
43
M P
13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13