ZyXEL Communications XS3800-28 Cli Reference Manual page 41

Table 24 auto-config Command Summary (continued)
COMMAND
auto-config url <https://host/
filename>
auto-config vlan <vlan-id>
show auto-config
See Chapter 97 on page 345
9.3 Command Examples
See Section 3.6 on page 20
mode on the Switch.
Chapter 9 Auto Configuration Commands
DESCRIPTION
Types the URL that can be used to access and download
the auto configuration file from a web server using HTTPS.
For example, https://
webserverIPaddressconfigfilename.cfg.
Enters the VLAN ID of the DHCP server that assigns the TFTP
server IP address and auto configuration file name to the
Switch.
The following information is displayed:
• The mode that is used for auto configuration.
• The status to see whether an auto configuration file is
successfully loaded to the Switch after you reboot the
Switch.
• The name of the auto configuration file that is loaded
after you reboot the Switch.
for the commands to enable and disable DHCP option 60.
for an example of how to configure auto configuration using the DHCP
Ethernet Switch CLI Reference Guide
41
M P
C 14
C 14
E 3