ZyXEL Communications XS3800-28 Cli Reference Manual page 231
Hide thumbs
Also See for XS3800-28:
- User manual (789 pages) ,
- Quick start manual (2 pages) ,
- User manual (648 pages)
Table of Contents
Advertisement
Table 158 OSPF Command Summary (continued)
COMMAND
ipv6 ospf instance-id <0-255>
ipv6 ospf passive-interface
no ipv6 ospf passive-interface
ipv6 ospf priority <0-255>
ipv6 ospf retransmit-interval <1-
65535>
ipv6 ospf transmit-delay <1-65535>
router ospf <router-id>
area <area-id>
no area <area-id>
area <area-id> authentication
area <area-id> authentication message-
digest
no area <area-id> authentication
area <area-id> default-cost <0-
16777215>
no area <area-id> default-cost
area <area-id> name <name>
area <area-id> stub
no area <area-id> stub
area <area-id> stub no-summary
no area <area-id> stub no-summary
area <area-id> nssa
no area <area-id> nssa
area <area-id> nssa no-summary
no area <area-id> nssa no-summary
area <area-id> virtual-link <router-
id>
Chapter 61 OSPF Commands
Ethernet Switch CLI Reference Guide
231
DESCRIPTION
OSPFv3 can support multiple instances per
link. Sets the IPv6 OSPF Instance ID to which
the VLAN is assigned. The interface will drop
the packets that contain a different
instance ID number.
Sets the VLAN interface to be passive. A
passive interface does not send or receive
IPv6 OSPF traffic.
Sets the VLAN interface to not be passive.
Sets the IPv6 OSPF priority for the VLAN
interface. Setting this value to 0 means that
this router will not participate in router
elections.
Sets the IPv6 OSPF retransmission interval in
this VLAN interface.
Sets the IPv6 OSPF transmission delay in this
IPv6 interface.
Enables and enters the OSPF configuration
mode.
Enables and sets the area ID.
Removes the specified area.
Enables simple authentication for the area.
Enables MD5 authentication for the area.
Sets the area to use no authentication
(None).
Sets the cost to the area.
Sets the area to use the default cost (15).
Sets a descriptive name for the area for
identification purposes.
Enables and sets the area as a stub area.
Disables stub network settings in the area.
Sets the stub area not to send any LSA (Link
State Advertisement).
Sets the stub area to send LSAs (Link State
Advertisements).
Enables and sets the area as a not-so-stubby
area.
Disables not-so-stubby network settings in
the area.
Sets the not-so-stubby area not to send any
LSA (Link State Advertisement).
Sets the not-so-stubby area to send LSAs
(Link State Advertisements).
Sets the virtual link ID information for the
area.
M
P
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
Hide quick links:
Advertisement
Table of Contents
