Use these commands to configure policies based on the classification of traffic flows. A classifier
distinguishes traffic into flows based on the configured criteria. A policy rule defines the treatment of a
traffic flow.
Note: Configure classifiers before you configure policies. See
information on classifiers.
64.1 Command Summary
The following section lists the commands for this feature.
Table 162 policy Command Summary
COMMAND
show policy
show policy <name>
Policy Commands
DESCRIPTION
Displays all policy related information.
Displays the specified policy related information.
Ethernet Switch CLI Reference Guide
247
C
H A P T E R
Chapter 15 on page 60
64
for more
M
P
E
3
E
3