ZyXEL Communications XS3800-28 Cli Reference Manual page 181
Hide thumbs
Also See for XS3800-28:
- User manual (789 pages) ,
- Quick start manual (2 pages) ,
- User manual (719 pages)
Table of Contents
Advertisement
Chapter 44 Link Layer Discovery Protocol (LLDP) Commands
Table 124 lldp Command Summary (continued)
COMMAND
no lldp basic-tlv port-
description
no lldp basic-tlv system-
capabilities
no lldp basic-tlv system-
description
no lldp basic-tlv system-name
no lldp med location
no lldp med location
<civic|coordinate|elin>
no lldp med network-policy
no lldp med network-policy
<voice|voice-signaling|guest-
voice|guest-voice-
signaling|softphone-voice|vid
eo-conferencing|streaming-
video|video-signaling>
no lldp med topology-change-
notification
no lldp notification
no lldp org-specific-tlv dot1
port-protocol-vlan-id
no lldp org-specific-tlv dot1
port-vlan-id
no lldp org-specific-tlv dot3
link-aggregation
no lldp org-specific-tlv dot3
mac-phy
no lldp org-specific-tlv dot3
max-frame-size
no lldp org-specific-tlv dot3
power-via-mdi
lldp
lldp reinitialize-delay <1-10>
lldp transmit-delay <1-8192>
DESCRIPTION
Disables the sending of Port Description TLVs on the
port(s).
Disables the sending of System Capabilities TLVs on
the port(s).
Disables the sending of System Description TLVs on the
port(s).
Disables the sending of System Name TLVs on the
port(s).
Deletes all location identification.
Deletes location identification of the specified type.
Deletes network policies for all connected media
endpoint devices.
Deletes network policies for the specified
applications.
Disables the sending of LLDP-MED topology change
traps.
Disables the sending of LLDP traps.
Disables the sending of IEEE 802.1 Port and Protocol
VLAN ID TLVs on the port(s).
Disables the sending of IEEE 802.1 Port VLAN ID TLVs on
the port(s).
Disables the sending of IEEE 802.3 Link Aggregation
TLVs on the port(s).
Disables the sending of IEEE 802.3 MAC/PHY
Configuration/Status TLVs on the port(s).
Disables the sending of IEEE 802.3 Maximum Frame
Size TLVs on the port(s).
Disables the sending of IEEE 802.3 Power via MDI TLVs
on the port(s).
Enables the LLDP feature on the Switch.
Sets a number of seconds for LLDP wait to initialize on
a port.
Sets the delay (in seconds) between the successive
LLDPDU transmissions initiated by value or status
changes in the Switch MIB.
Ethernet Switch CLI Reference Guide
181
M
P
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
Hide quick links:
Advertisement
Table of Contents
