ZyXEL Communications XS3800-28 Cli Reference Manual page 66

This example logs in to the CLI of member 00:13:49:00:00:01, looks at the current firmware version on the
member Switch, logs out of the member's CLI, and returns to the CLI of the manager.
sysname# configure
sysname(config)# cluster rcommand 00:13:49:00:00:01
Connected to 127.0.0.2
Escape character is '^]'.
User name: admin
Password: ****
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
ES-2108PWR# show version
Current ZyNOS version: V3.80(ABS.0)b2 | 05/28/2007
ES-2108PWR# exit
Telnet session with remote host terminated.
Closed
sysname(config)#
This example looks at the current status of the Switch's cluster.
sysname# show cluster
Cluster Status: Manager
VID: 1
Manager: 00:13:49:ae:fb:7a
The following table describes the labels in this screen.
Table 40 show cluster
LABEL
Cluster Status
VID
Manager
Chapter 16 Cluster Commands
DESCRIPTION
This field displays the role of this Switch within the cluster.
Manager: This Switch is the device through which you manage the cluster member
switches.
Member: This Switch is managed by the specified manager.
None: This Switch is not in a cluster.
This field displays the VLAN ID used by the cluster.
This field displays the cluster manager's MAC address.
Ethernet Switch CLI Reference Guide
66