ZyXEL Communications XS3800-28 Cli Reference Manual page 55

Table 32 CFM Command Summary (continued)
COMMAND
show ethernet cfm remote
show ethernet cfm virtual-mac
show ethernet cfm virtual-mac port
<port-list>
13.5 Command Examples
This example creates MD1 (with MD index 1 and level 1) and MA2 (with MA index 2 and VLAN ID 2) under
MD1 that defines a CFM domain.
sysname# config
sysname(config)# ethernet cfm md 1 format string name MD1 level 1
sysname(config)# ethernet cfm ma 2 format string name MA2 md 1 primary-
vlan 2
sysname(config-ma)# exit
sysname(config)# exit
sysname# write memory
Note: Remember to save new settings using the write memory command.
This example deletes MA2 (with MA index 2) from MD1 (with MD index 1).
sysname# config
sysname(config)# no ethernet cfm ma 2 md 1
sysname(config)# exit
sysname# write mem
This example creates MA3 (with MA index 3 and VLAN ID 123) under MD1, and associates port 1 as an
MEP port with MEP ID 301 in the specified CFM domain. This also sets MHF (MIP half function) to default to
have the Switch automatically create MIPs for this MA and on the ports belonging to this MA's VLAN
when there are no lower configured MD levels or there is a MEP at the next lower configured MD level
on the port. This also sets a remote MEP in MA3.
sysname# config
sysname(config)# ethernet cfm ma 3 format string name MA3 md 1 primary-vlan
123
sysname(config-ma)# mep 301 interface port-channel 1 direction up priority 2
sysname(config-ma)# mep 301 interface port-channel 1 direction up priority 2
cc-enable
sysname(config-ma)# mhf-creation default
sysname(config-ma)# remote-mep 117
sysname(config-ma)# exit
sysname(config)# exit
sysname# write mem
Chapter 13 CFM Commands
DESCRIPTION
Displays a list of MA(s), MEP(s) and the remote MEP(s)
under the configured MD(s).
Displays all virtual MAC addresses.
Displays the MAC address(es) of the specified port(s).
Ethernet Switch CLI Reference Guide
55
M P
E 13
E 13
E 13