ZyXEL Communications XS3800-28 Cli Reference Manual page 334

Table 215 trtcm Command Summary (continued)
COMMAND
trtcm cir <rate>
trtcm pir <rate>
trtcm dscp green <0-63>
trtcm dscp yellow <0-63>
trtcm dscp red <0-63>
trtcm dscp profile <name>
no trtcm dscp profile
94.3 Command Examples
This example activates trTCM on the Switch with the following settings:
• Sets the Switch to inspect the DSCP value of packets (color-aware mode).
• Enables trTCM on ports 1-5.
• Sets the Committed Information Rate (CIR) to 4000 Kbps.
• Sets the Peak Information Rate (PIR) to 4500 Kbps.
• Specifies DSCP value 7 for green packets, 22 for yellow packets and 44 for red packets.
sysname(config)# trtcm
sysname(config)# trtcm mode color-aware
sysname(config)# interface port-channel 1-5
sysname(config-interface)# trtcm
sysname(config-interface)# trtcm cir 4000
sysname(config-interface)# trtcm pir 4500
sysname(config-interface)# trtcm dscp green 7
sysname(config-interface)# trtcm dscp yellow 22
sysname(config-interface)# trtcm dscp red 44
sysname(config-interface)# exit
sysname(config)# exit
sysname# show running-config interface port-channel 1 trtcm
Building configuration...
Current configuration:
interface port-channel 1
trtcm
trtcm cir 4000
trtcm pir 4500
trtcm dscp green 7
trtcm dscp yellow 22
trtcm dscp red 44
exit
Chapter 94 trTCM Commands
Ethernet Switch CLI Reference Guide
334
DESCRIPTION
Sets the Commit Information Rate on the
port(s).
Sets the Peak Information Rate on the port(s).
Specifies the DSCP value to use for packets
with low packet loss priority.
Specifies the DSCP value to use for packets
with medium packet loss priority.
Specifies the DSCP value to use for packets
with high packet loss priority.
Specifies the DSCP profile that you want to
apply to packets on the port(s).
Sets the Switch to apply the default DSCP
profile to packets on the port(s).
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13