ZyXEL Communications XS3800-28 Cli Reference Manual page 292

Table 184 sflow Command Summary (continued)
COMMAND
sflow collector <ip-address> [udp-
port <udp-port>]
show sflow
78.3 Command Examples
This example enables the sFlow agent on the Switch and configures an sFlow collector with the IP
address 10.1.1.58 and UDP port 6343. This example also enables sFlow on ports 1, 2, 3 and 4 and
configures the same collector, sample rate and poll interval for these ports.
sysname(config)# sflow
sysname(config)# sflow collector 10.1.1.58 udp-port 6343
sysname(config)# interface port-channel 1,2,3,4
sysname(config-interface)# sflow
sysname(config-interface)# sflow collector 10.1.1.58 poll-interval 120
sample-rate 2500
sysname(config-interface)# exit
sysname(config)# exit
sysname# show sflow
sFlow version: 5
sFlow Global Information:
sFlow Status: Active
index
-----
1
sFlow Port Information:
Port
----
1
2
3
4
5
6
7
....
Chapter 78 sFlow
Collector Address
-----------------
10.1.1.58
Active Sample-rate
------ -----------
Yes 2500
Yes 2500
Yes 2500
Yes 2500
No 32768
No 32768
No 32768
Ethernet Switch CLI Reference Guide
DESCRIPTION
Configures an sFlow collector and the UDP port the
Switch uses to send sFlow datagram to the collector.
The default UDP port is 6343.
Displays sFlow settings on the Switch.
UDP port
--------
6343
Poll-interval Collector Address
------------- -----------------
120
120
120
120
120
120
120
292
10.1.1.58
10.1.1.58
10.1.1.58
10.1.1.58
0.0.0.0
0.0.0.0
0.0.0.0
M P
C 13
E 3