ZyXEL Communications XS3800-28 Cli Reference Manual page 75

Table 51 time Command Summary (continued)
COMMAND
time daylight-saving-time start-
date <week> <day> <month>
<o'clock>
time daylight-saving-time end-
date <week> <day> <month>
<o'clock>
no time daylight-saving-time
time daylight-saving-time help
Table 52 timesync Command Summary
COMMAND
show timesync
timesync server <ip|domain name>
timesync <daytime|time|ntp>
no timesync
19.2 Command Examples
This example sets the current date, current time, time zone, and daylight savings time.
sysname# configure
sysname(config)# time date 06/04/2007
sysname(config)# time timezone -600
sysname(config)# time daylight-saving-time
sysname(config)# time daylight-saving-time start-date second Sunday
--> March 2
sysname(config)# time daylight-saving-time end-date first Sunday
--> November 2
sysname(config)# time 13:24:00
sysname(config)# exit
sysname# show time
Current Time
Current Date
Chapter 19 Date and Time Commands
DESCRIPTION
Sets the day and time when Daylight Saving Time starts.
In most parts of the United States, Daylight Saving Time
starts on the second Sunday of March at 2 A.M. local time.
In the European Union, Daylight Saving Time starts on the
last Sunday of March at 1 A.M. GMT or UTC, so the
o'clock field depends on your time zone.
Sets the day and time when Daylight Saving Time ends.
In most parts of the United States, Daylight Saving Time
ends on the first Sunday of November at 2 A.M. local time.
In the European Union, Daylight Saving Time ends on the
last Sunday of October at 1 A.M. GMT or UTC, so the
o'clock field depends on your time zone.
Disables daylight saving on the Switch.
Provides more information about the specified command.
DESCRIPTION
Displays time server information.
Sets the IP address or domain name of the timeserver. The
Switch attempts to connect to the timeserver for up to 60
seconds.
The Switch synchronizes with the time server in the
following situations:
•
•
•
Sets the time server protocol. You have to configure a time
server before you can specify the protocol.
Disables timeserver settings.
13:24:03 (UTC-05:00 DST)
2007-06-04
Ethernet Switch CLI Reference Guide
When the Switch starts up.
Every 24 hours after the Switch starts up.
When the time server IP address or protocol is
updated.
75
M P
C 13
C 13
C 13
C 13
M P
E 3
C 13
C 13
C 13