ZyXEL Communications XS3800-28 Cli Reference Manual page 216

Table 150 mstp Command Summary (continued)
COMMAND
mstp interface port-channel <port-
list> rootguard
no mstp interface port-channel
<port-list> rootguard
Table 151 mstp instance Command Summary
COMMAND
show mstp instance <number>
no mstp instance <number>
mstp instance <number> priority <0-
61440>
mstp instance <number> vlan <vlan-
list>
no mstp instance <number> vlan <1-
4094>
mstp instance <number> interface
port-channel <port-list>
no mstp instance <number> interface
port-channel <port-list>
mstp instance <number> interface
port-channel <port-list> path-cost
<1-65535>
mstp instance <number> interface
port-channel <port-list> priority
<0-255>
Chapter 57 MSTP Commands
DESCRIPTION
Enables root guard on the specified port in order to
prevent the switch(es) attached to the port from
becoming the root bridge.
Disables root guard on a port.
DESCRIPTION
Displays the specified MSTP instance configuration.
Disables the specified MSTP instance on the Switch.
Specifies the bridge priority of the instance.
priority: Must be a multiple of 4096.
Specifies the VLANs that belongs to the instance.
Disables the assignment of specific VLANs from an
MST instance.
Specifies the ports you want to participate in this MST
instance.
Disables the assignment of specific ports from an MST
instance.
Specifies the cost of transmitting a frame to a LAN
through the port(s). It is recommended you assign it
according to the speed of the bridge.
Sets the priority for the specified ports. Priority decides
which port should be disabled when more than one
port forms a loop in a Switch. Ports with a higher
priority numeric value are disabled first.
Ethernet Switch CLI Reference Guide
216
M P
C 13
C 13
M P
E 3
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13