ZyXEL Communications XS3800-28 Cli Reference Manual page 213

Table 149 Command Summary: mrstp
COMMAND
mrstp interface <port-list> edge-
port
no mrstp interface <port-list>
edge-port
mrstp interface <port-list> path-
cost <1-65535>
mrstp interface <port-list>
priority <0-255>
mrstp interface <port-list>
rootguard
no mrstp interface <port-list>
rootguard
mrstp interface <port-list> tree-
index <tree-index>
no mrstp <tree-index>
no mrstp interface <port-list>
56.3 Command Examples
This example configures MRSTP in the following way:
• Enables MRSTP on the Switch.
• Activates tree 1 and sets the bridge priority, Hello Time, Maximum Age and Forward Values for this
RSTP configuration.
• Activates MRSTP for ports 1-5 and sets path cost on these ports to 127.
• Adds ports 1-5 to tree index 1.
sysname(config)# spanning-tree mode mrstp
sysname(config)# mrstp 1
sysname(config)# mrstp 1 priority 16384
sysname(config)# mrstp 1 hello-time 2 maximum-age 15 forward-delay 30
sysname(config)# mrstp interface 1-5
sysname(config)# mrstp interface 1-5 path-cost 127
sysname(config)# mrstp interface 1-5 tree-index 1
Chapter 56 MRSTP Commands
DESCRIPTION
Sets the specified ports as edge ports. This allows the
port to transition to a forwarding state immediately
without having to go through the listening and
learning states.
Note: An edge port becomes a non-edge port
Sets the listed ports as non-edge ports.
Sets a path cost to the specified ports.
Sets the priority value to the specified ports for MRSTP.
Enables root guard on the specified port in order to
prevent the switch(es) attached to the port from
becoming the root bridge.
Disables root guard on a port.
Assigns the specified port list to a specific MRSTP
configuration.
Disables the specified MRSTP configuration.
Disables the MRSTP assignment from the specified
port(s).
Ethernet Switch CLI Reference Guide
213
as soon as it receives a Bridge Protocol
Data Units (BPDU).
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13