ZyXEL Communications XS3800-28 Cli Reference Manual page 129

Table 92 igmp-snooping vlan Command Summary (continued)
COMMAND
igmp-snooping vlan <vlan-id>
[name <name>]
no igmp-snooping vlan <vlan-id>
Table 93 interface igmp Command Summary
COMMAND
show interfaces config <port-
list> igmp-group-limited
show interfaces config <port-
list> igmp-immediate-leave
show interfaces config <port-
list> igmp-query-mode
show interfaces config <port-
list> igmp-snooping filtering
show interfaces config <port-
list> igmp-snooping group-
limited
show interfaces config <port-
list> igmp-snooping leave-mode
show interfaces config <port-
list> igmp-snooping query-mode
interface port-channel <port-
list>
igmp-snooping
authentication
igmp-snooping fast-leave-
timeout <200-6348800>
igmp-snooping filtering
profile <name>
Chapter 35 IGMP Snooping Commands
DESCRIPTION
Specifies which VLANs to perform IGMP snooping on if the
mode is fixed. Optionally, sets a name for the multicast
VLAN.
name: 1-32 printable characters; spaces are allowed if you
put the string in double quotation marks (").
Removes IGMP snooping configuration on the specified
VLAN if the mode is fixed.
DESCRIPTION
Displays the group limits for IGMP snooping.
Displays the immediate leave settings for IGMP snooping.
Displays the IGMP query mode for the specified port(s).
Displays the name(s) of the IGMP filtering profiles used for
the specified port(s).
Displays whether the group limit is enabled and the
maximum number of the multicast groups the specified
port(s) is allowed to join.
Displays the IGMP leave mode of the specified port(s).
Displays the IGMP querier mode of the specified port(s).
Enters config-interface mode for the specified port(s).
Enables IGMP snooping authentication on the port(s).
When a multicast host (connected to the specified ports)
sends a message to join a multicast group, the Switch
sends an access request (that conatins the host
identification information) to an AAA server before
forwarding the join message to the multicast router/switch.
The Switch learns the multicast group membership when
the AAA server returns an access-accept. If the AAA server
returns an access-reject, the Switch will not learn the
multicast group membership, nor process the packet
further. If the multicast group and port has already been
learned, the Switch will not do the authentication again.
Set the IGMP snooping fast leave timeout (in miliseconds)
the Switch uses to update the forwarding table for the
port(s).
This defines how many seconds the Switch waits for an
IGMP report before removing an IGMP snooping
membership entry when an IGMP leave message is
received on this port from a host.
Assigns the specified IGMP filtering profile to the port(s). If
IGMP filtering is enabled on the Switch, the port(s) can only
join the multicast groups in the specified profile.
Ethernet Switch CLI Reference Guide
129
M P
C 13
C 13
M P
E 3
E 3
E 3
E 3
E 3
E 3
E 3
C 13
C 13
C 13
C 13