ZyXEL Communications XS3800-28 Cli Reference Manual page 54

Table 32 CFM Command Summary (continued)
COMMAND
no mep <mep-id>
no mep <mep-id> inactive
no mep <mep-id> cc-enable
ethernet cfm md <md-index> format
<dns|mac|string> name <md-name>
level <0-7>
ethernet cfm management-address-
domain ip [<ip-addr>]
interface port-channel <port-list>
ethernet cfm virtual-mac <mac-
addr>
no ethernet cfm virtual-mac
no ethernet cfm
no ethernet cfm md <md-index>
no ethernet cfm ma <ma-index> md
<md-index>
no ethernet cfm management-address-
domain
show ethernet cfm linktrace
show ethernet cfm local
show ethernet cfm local stack
show ethernet cfm local stack mep
show ethernet cfm local stack mep
<mep-id> ma <ma-index> md <md-
index>
show ethernet cfm local stack mep
<mep-id> ma <ma-index> md <md-
index> mep-ccmdb [remote-mep <mep-
id>]
show ethernet cfm local stack mip
show ethernet cfm local stack mip
mip-ccmdb
Chapter 13 CFM Commands
DESCRIPTION
Deletes a specified MEP.
Enables an MEP.
Disallows an MEP sending Connectivity Check
Messages (CCMs) periodically to other MEPs.
Creates an MD (Maintenance Domain) with the
specified name and level number.
md-name: Enters a domain name, MAC address or a
descriptive name for the MD.
Sets the Switch to carry the host name and
management IP address for the VLAN to which an
MEP belongs or the specified IP address in CFM
packets.
This helps you to easily identify a remote MEP by its
host name and management IP address showed in
the link trace database and MEP-CCM database.
Enters config-interface mode for configuring the
specified port(s).
Assigns a virtual MAC address(es) to the specified
port(s) so that each specified port can have its own
MAC address for CFM.
You cannot use the copy running-config
interface port-channel command to copy the
virtual MAC address from the specified port to other
ports.
Removes the virtual MAC address(es) and sets the
port(s) to use the default system MAC address.
Disables CFM on the Switch.
Deletes the specified MD.
Deletes an MA from the specified MD.
Sets the Switch to not carry the host name and
management IP address in CFM packets.
Displays the CFM link trace database information.
Displays the detailed settings of the configured MD(s)
and MA(s).
Displays a list of all maintenance points, such as MIP
and MEP.
Displays a list of the MEP(s).
Displays the specified MEP's general, fault notification
generator, continuity-check, loopback and link trace
information.
Displays the specified MEP's MEP-CCM database
information. Each MEP maintains an MEP CCM
database which stores information about remote
MEPs in the MA when receiving CCMs.
Displays a list of the MIP(s).
Displays the MIP-CCM database.
Ethernet Switch CLI Reference Guide
54
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 13
E 13
E 13
E 13
E 13
E 13
E 13
E 13