ZyXEL Communications XS3800-28 Cli Reference Manual page 367

This example sends Ping requests to an Ethernet device with IP address 172.16.37.254.
sysname# ping 172.16.37.254
Resolving 172.16.37.254... 172.16.37.254
sent rcvd rate
1 1 100
2 2 100
3 3 100
The following table describes the labels in this screen.
Table 235 ping
LABEL
sent
rcvd
rate
rtt
avg
mdev
max
min
reply from
This example shows the current status of the various alarms in the Switch.
sysname# show alarm-status
name status
----------------- ------
VOLTAGE Normal
TEMPERATURE Normal
FAN Normal
POE OVER LOAD Normal
POE SHORT CIRCUIT Normal
POE POWERBOX Normal
The following table describes the labels in this screen.
Table 236 show alarm-status
LABEL DESCRIPTION
name This field displays the name or type of the alarm.
status This field displays the status of the alarm.
Normal: The alarm is off.
Error: The alarm is on.
suppressAlarm This field displays whether or not the alarm is inactive.
alarmLED This field displays whether or not the LED for this alarm is on.
Chapter 106 Additional Commands
rtt avg mdev
0 0 0
0 0 0
10 1 3
DESCRIPTION
This field displays the sequence number of the ICMP request the Switch sent.
This field displays the sequence number of the ICMP response the Switch received.
This field displays the percentage of ICMP responses for ICMP requests.
This field displays the round trip time of the ping.
This field displays the average round trip time to ping the specified IP address.
This field displays the standard deviation in the round trip time to ping the specified IP
address.
This field displays the maximum round trip time to ping the specified IP address.
This field displays the minimum round trip time to ping the specified IP address.
This field displays the IP address from which the Switch received the ICMP response.
suppressAlarm
-------------
No
No
No
No
No
Yes
Ethernet Switch CLI Reference Guide
367
max min reply from
0 0 172.16.37.254
0 0 172.16.37.254
10 0 172.16.37.254
alarmLED
--------
Off
Off
Off
Off
Off
Off