ZyXEL Communications XS3800-28 Cli Reference Manual page 160

Table 114 ipv6 icmp and ping6 Command Summary (continued)
COMMAND
ping6 <ipv6-address> <[-i
<interface-type> <interface-
number>] [-t] [-l <1-1452>] [-n <1-
65535>] [-s <ipv6-address>]
show ipv6 mtu
Table 115 ipv6 mld snooping-proxy Command Summary
COMMAND
clear ipv6 mld snooping-proxy
statistics all
clear ipv6 mld snooping-proxy
statistics port
clear ipv6 mld snooping-proxy
statistics system
clear ipv6 mld snooping-proxy
statistics vlan
interface port-channel <port-list>
ipv6 mld snooping-proxy
filtering group-limited
ipv6 mld snooping-proxy
filtering group-limited number
<number>
ipv6 mld snooping-proxy
filtering profile <name>
no ipv6 mld snooping-proxy
filtering group-limited
no ipv6 mld snooping-proxy
filtering profile
ipv6 mld snooping-proxy
Chapter 42 IPv6 Commands
DESCRIPTION
Sends IPv6 ping packets to the specified Ethernet
device.
interface-type: the Switch supports only the VLAN
interface type at the time of writing.
interface-number: The VLAN ID to which the Ethernet
device belongs.
-l <1-1452>: Specifies the size of the ping packet.
-t: Sends ping packets to the Ethernet device
indefinitely. Press [CTRL]+C to terminate the Ping
process.
-n <1-65535>: Specifies how many times the Switch
sends the ping packets.
-s <ipv6-address>: Specifies the source IPv6 address
of the pin packets.
The Switch uses Path MTU Discovery to discover Path
MTU (PMTU), that is, the minimum link MTU of all the links
in a path to the destination. If the Switch receives an
ICMPv6 Packet Too Big error message after sending a
packet, it adjusts the next packet size according to the
suggested MTU in the error message.
Displays IPv6 path MTU information on the Switch.
DESCRIPTION
Removes all MLD snooping-proxy statistics of the
Switch.
Removes the MLD snooping-proxy statistics of the
port(s).
Removes the MLD snooping-proxy statistics of the
Switch.
Removes the MLD snooping-proxy statistics of the
multicast VLAN(s).
Enters config-interface mode for the specified port(s).
Enables multicast group limits for MLD snooping-proxy.
Sets the maximum number of the multicast groups the
port(s) is allowed to join.
number: 0 - 255
Assigns the specified MLD filtering profile to the port(s).
If MLD filtering is enabled on the Switch, the port(s) can
only join the multicast groups in the specified profile.
Disables multicast group limits for MLD snooping.
Disables MLD filtering on the port(s) and allows the
port(s) to join any group.
Enables IPv6 MLD snooping-proxy on the Switch.
Ethernet Switch CLI Reference Guide
160
M P
E 0
E 3
M P
E 13
E 13
E 13
E 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13