ZyXEL Communications XS3800-28 Cli Reference Manual page 165

Table 116 ipv6 nd Command Summary (continued)
COMMAND
no ipv6 nd dad-attempts
no ipv6 nd managed-config-flag
no ipv6 nd ns-interval
no ipv6 nd other-config-flag
no ipv6 nd prefix <ipv6-
prefix>/<prefix-length>
no ipv6 nd ra interval
no ipv6 nd ra lifetime
no ipv6 nd ra suppress
no ipv6 nd reachable-time
ipv6 hop-limit <1-255>
ipv6 route <ipv6-prefix>/<prefix-
length> <next-hop>
ipv6 route <ipv6-prefix>/<prefix-
length> <next-hop> <interface-
type> <interface-number>
no ipv6 hop-limit
no ipv6 route <ipv6-prefix>/
<prefix-length>
show ipv6 route
show ipv6 route static
show ipv6 prefix
show ipv6 prefix <interface-type>
<interface-number>
Table 117 ipv6 neighbor Command Summary
COMMAND
clear ipv6 neighbor
clear ipv6 neighbor <interface-
type> <interface-number>
Chapter 42 IPv6 Commands
DESCRIPTION
Resets the number of the DAD attempts to the default
settings (3).
Configures the Switch to set the "managed address
configuration" flag (the M flag) to 0 in IPv6 router
advertisements, which means hosts do not use DHCPv6
to obtain IPv6 stateful addresses.
Resets the time interval between retransmissions of
neighbor solicitations to the default setting (1000
milliseconds).
Configures the Switch to set the "Other stateful
configuration" flag (the O flag) to 0 in IPv6 router
advertisements, which means hosts do not use DHCPv6
to obtain additional configuration settings, such as DNS
information.
Sets the Switch to not include the specified IPv6 prefix
and prefix length in router advertisements for this VLAN.
Resets the minimum and maximum time intervals
between retransmissions of router advertisements for
this VLAN to the default settings.
Resets the lifetime of a router in router advertisements
to the default setting (1800 seconds).
Enables the sending of router advertisements and
responses to router solicitations on this interface.
Resets the reachable time of a neighbor to the default
setting (30000 milliseconds).
Sets the maximum number of hops on which an IPv6
packet is allowed to transmit before it is discarded by
an IPv6 router, which is similar to the TTL field in IPv4.
Creates a static route to forward packets with the
specified IPv6 prefix and prefix length to a specific
gateway.
Creates a static route to forward packets with the
specified IPv6 prefix and prefix length to a specific
gateway in a VLAN.
Resets the maximum number of hops in router
advertisements to the default setting.
Removes an IPv6 static route.
Displays IPv6 routing information on the Switch.
Displays static IPv6 routing information on the Switch.
Displays all IPv6 prefix information on the Switch.
Displays IPv6 prefix information for the specified
interface (VLAN).
DESCRIPTION
Removes all IPv6 neighbor information on the Switch.
Removes IPv6 neighbor information for a specified
interface on the Switch.
Ethernet Switch CLI Reference Guide
165
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 3
E 3
E 3
E 3
M P
E 13
E 13