ZyXEL Communications XS3800-28 Cli Reference Manual page 113

• - means short reach is not enabled
sysname# configure
sysname(config)# green-ethernet eee
sysname(config)# green-ethernet short-reach
sysname(config)# green-ethernet auto-power-down
sysname(config)# interface port-channel 1-4
sysname(config-interface)# green-ethernet eee
sysname(config-interface)# green-ethernet auto-power-down
sysname(config-interface)# exit
sysname(config)# exit
sysname# show green-ethernet eee
EEE globally configuration : Enable
Port Port status
---- ---------------
1 100M/F
2 Down
3 100M/F
4 Down
sysname# show green-ethernet auto-power-down
Auto Power Down globally configuration : Enable
Port Config Status
---- ------- ----------
1 Enable Power down
2 Enable
3 Enable Unsupported
4 Disable
sysname# show green-ethernet short-reach
Short Reach globally configuration : Enable
sysname#
The following example shows how to configure short reach if the Switch supports short reach per port
sysname# configure
sysname(config)# green-ethernet short-reach
sysname# configure
sysname(config)# interface port-channel
sysname(config-interface)# green-ethernet short-reach
Chapter 30 Green Ethernet Commands
Config Status
------- ---------
Enable Active
Enable Inactive
Enable Unsupported
Disable
Normal
-
Ethernet Switch CLI Reference Guide
113
-
1-4