ZyXEL Communications XS3800-28 Cli Reference Manual page 188

Chapter 44 Link Layer Discovery Protocol (LLDP) Commands
This example shows remote Switch (the Switch connected to the port on the Switch you're accessing)
LLDP information.
sysname# show lldp info remote interface port-channel 2
LLDP Remote Device Information Detail:
Local Port:
Chassis ID Subtype: mac-address
Chassis ID: 00:19:cb:00:00:02
Port ID Subtype: local-assigned
Port ID:
Time To Live:
Extended TLV Info 802.1 OUI (hex value) = 00-80-c2
-Port VLAN ID
-DCBX Application Priority
ether-type:
-DCBX ETS Configuration
-Willing Bit: False
-Max Traffic Classes:
-Priority-Group
-Priority-Group
-Priority-Group
-Priority-Group
-Priority-Group
-Priority-Group
-Priority-Group
-Priority-Group
-DCBX PFC Configuration
-Willing Bit:
-PFC capability:
-Priority enable list: 0-2
Extended TLV Info 802.3 OUI (hex value) = 00-12-0f
-Max Frame Size
-Frame Size:
--------------------------------------------------
sysname#
The following table describes the labels in this screen.
Remote Switch LLDP information
Table 131
LABEL
LLDP Remote Device
Information Detail
Local Port
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
Time To Live
2
47
120
-ID: 1
fcoe Priority:
3
7: Strict-priority, Priority-list:-
6: Strict-priority, Priority-list:-
5: Strict-priority, Priority-list:-
4: Strict-priority, Priority-list:-
3: Strict-priority, Priority-list:-
2: Strict-priority, Priority-list:7
1: ETS Bandwidth
0: ETS Bandwidth
True
8
1518
DESCRIPTION
This contains the following information:
This is the local port number which receives the LLDPDU from the remote Switch.
This displays how the chassis of the remote Switch is identified.
This displays the chassis ID of the remote Switch. The chassis ID is identified by the
chassis ID subtype.
This displays how the port is identified.
This is the ID of the remote Switch.
This displays the time-to-live (TTL) multiplier of LLDP frames. The device information on
the neighboring devices ages out and is discarded when its corresponding TTL expires.
The TTL value is to multiply the TTL multiplier by the LLDP frames transmitting interval.
Ethernet Switch CLI Reference Guide
188
2
50%, Priority-list:3-6
50%, Priority-list:0-2