ZyXEL Communications XS3800-28 Cli Reference Manual page 166

Table 117 ipv6 neighbor Command Summary (continued)
COMMAND
ipv6 neighbor <interface-type>
<interface-number> <ipv6-address>
<mac-address>
no ipv6 neighbor <interface-type>
<interface-number> <ipv6-address>
show ipv6 neighbor
show ipv6 neighbor <interface-
type> <interface-number>
show ipv6 router
show ipv6 router <interface-type>
<interface-number>
show ipv6 neighbor address
show ipv6 neighbor count
show ipv6 neighbor interface
show ipv6 neighbor mac
Table 118 ipv6 snooping policy Command Summary
COMMAND
ipv6 snooping policy <name>
limit address-count <number>
no limit address-count
prefix-glean
no prefix-glean
protocol dhcp
no protocol dhcp
no ipv6 snooping policy <name>
interface vlan <1-4094>
ipv6 snooping attach-policy
<name>
Chapter 42 IPv6 Commands
DESCRIPTION
Creates a static IPv6 neighbor entry in the IPv6 cache
for this VLAN.
Removes a static IPv6 neighbor entry from the IPv6
cache.
Displays the IPv6 neighbor devices on the Switch
Displays IPv6 neighbor devices for a specified interface
on the Switch.
Displays all IPv6 router advertisement information on
the Switch.
Displays IPv6 router advertisement information for a
specified interface on the Switch.
Displays and arranges the data according to IPv6
address of the neighboring device.
Displays the number of the neighboring device(s).
Displays and arranges the data according to IPv6
interface on which the IPv6 address is created or
through which the neighboring device can be
reached.
Displays and arranges the data according to MAC
address of the IPv6 interface on which the IPv6 address
is configure or the MAC address of the neighboring
device.
DESCRIPTION
Enters sub-command mode for creating an IPv6
snooping policy.
Sets the number of IPv6 addresses and prefixes learned
using the IPv6 snooping policy.
The maximum limit address count is the maximum size
of the IPv6 source guard binding table.
Removes the maximum limit address count setting.
Allows the Switch to learn the IPv6 prefix and length
from DHCPv6 sniffed packets.
Disables IPv6 prefix gleaning.
Enables DHCP snooping to have the Switch sniff
DHCPv6 packets sent from a DHCPv6 server to a
DHCPv6 client.
Disables DHCP snooping.
Removes the specified IPv6 snooping policy.
Enters config-route-domain mode for the specified
VLAN. Creates the VLAN, if necessary.
Enables a IPv6 snooping policy on the specified VLAN
interface.
Ethernet Switch CLI Reference Guide
166
M P
C 13
C 13
E 3
E 3
E 3
E 3
E 3
E 3
E 3
E 3
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13