ZyXEL Communications XS3800-28 Cli Reference Manual page 219

Table 153 show mstp instance (continued)
LABEL
BridgeForwardDelay
ForceVersion
TransmissionLimit
CIST_RRootID
CIST_RRootPathCost
This example adds the Switch to the MST region MSTRegionNorth. MSTRegionNorth is on revision number
1. In MSTRegionNorth, VLAN 2 is in MST instance 1, and VLAN 3 is in MST instance 2.
sysname# configure
sysname(config)# mstp
sysname(config)# mstp configuration-name MSTRegionNorth
sysname(config)# mstp revision 1
sysname(config)# mstp instance 1 vlan 2
sysname(config)# mstp instance 2 vlan 3
sysname(config)# exit
Chapter 57 MSTP Commands
DESCRIPTION
This field displays the time (in seconds) the Switch will wait before changing states (that
is, listening to learning to forwarding).
This field indicates whether BPDUs are RSTP (a value less than 3) or MSTP (a value
greater than or equal to 3).
This field displays the maximum number of BPDUs that can be transmitted in the interval
specified by BridgeHelloTime.
This field displays the unique identifier for the CIST regional root bridge, consisting of
bridge priority plus MAC address.
This field displays the path cost from the root port on this Switch to the CIST regional root
switch.
Ethernet Switch CLI Reference Guide
219