ZyXEL Communications XS3800-28 Cli Reference Manual page 265

Table 168 private-vlan Command Summary (continued)
COMMAND
no private-vlan association
<secondary-vlan-list>
interface port-channel <port-
list>
private-vlan mode
<promiscuous | isolated |
community> association
<vlan-id> dot1q <tagged |
untagged>
no private-vlan mode
show vlan private-vlan
show vlan private-vlan <vlan-id>
69.2.2 Command Example
This example sets private VLAN 100 as a primary private VLAN, private VLAN 101 as a community private
VLAN and private VLAN 102 as an isolated private VLAN. VLANs 101 and 102 are secondary private
VLANs that are associated primary private VLAN 101. Use the specified show command to display all
private VLAN configurations on the switch.
Chapter 69 Private VLAN Commands
DESCRIPTION
Removes association between the primary VLAN and the
specified secondary VLAN(s).
Enters config-interface mode for the specified port(s).
Configures PVLAN on a port. Set the associated PVLAN ID,
type of private VLAN and specify whether outgoing frames
from this port are tagged or not.
Removes PVLAN mode configuration.
Displays the settings and status of all private VLAN rules on
the Switch.
Displays the settings and status of the specified private
VLAN rule on the Switch.
Ethernet Switch CLI Reference Guide
265
M P
C 13
C 13
C 13
C 13
E 3
E 3