ZyXEL Communications XS3800-28 Cli Reference Manual page 281

75.3 Command Summary
The following section lists the commands for this feature.
Table 180 rmon Command Summary
COMMAND
rmon alarm alarmtable <alarm-index>
variable <variable> interval <interval-
integer> sample-type <absolute|delta>
startup-alarm <startup-alarm> rising-
threshold <rising-integer> <event-index>
falling-threshold <falling-integer>
<event-index> [owner <owner>]
rmon event eventtable <event-index> [log]
[trap <community>] [owner <owner>]
[description <description>]
rmon history historycontrol
<historycontrol-index> buckets <1-65535>
interval <1-3600> port-channel <interface-
id> [owner <owner>]
rmon statistics etherstats <etherstats-
index> port-channel <interface-id> [owner
<owner>]
no rmon alarm alarmtable <alarm-index>
no rmon event eventtable <event-index>
no rmon history historycontrol
<historycontrol-index>
no rmon statistics etherstats <etherstats-
index>
show rmon alarm alarmtable [alarm-index]
show rmon event eventtable [event-index]
show rmon history historycontrol [index
<historycontrol-index>]
show rmon history historycontrol port-
channel <interface-id>
Chapter 75 RMON
Ethernet Switch CLI Reference Guide
281
DESCRIPTION
Sets an alarm that occurs when the sampled
data exceeds the specified threshold. See
Section 75.3.2 on page 282
information.
Sets the actions that the Switch takes when
an associated alarm is generated by the
Switch.
log: set this to have the Switch record the
logs for the alarm
trap <community>: set this to have the
Switch send a trap with the specified
community.
description: the description of the event.
Sets RMON history configuration settings.
buckets <1-65535>: the number of data
samplings the network manager requests
the Switch to store. At the time of writing, the
Switch can only store up to 200 data
samplings although you can configure a
bucket number higher than 200.
interval <1-3600>: the time in seconds
between data samplings.
Sets to collect network traffic on the
specified Ethernet port since the last time
the Switch was reset.
Removes the specified alarm's settings.
Removes the action's settings of the
specified event.
Removes the RMON history configuration
settings for the specified event.
Stops collecting network traffic for the
specified event.
Displays all or the specified alarm settings.
Displays all or the specified event settings.
Displays all historical network traffic statistics
or only the specified entry's.
Displays historical network traffic statistics for
the specified port.
M P
C 13
for more
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 3
E 3
E 3
E 3